|
Professor Dr. Pitt SUPAPHOL
|
|
|
Address: |
The Petroleum and
Petrochemical College |
|
Education: |
Ph.D. (Polymer Engineering),
University of Tennessee, Knoxville, USA, 1999 |
|
Honors/Awards: |
- (2010) Cordon: Companion
(Fourth Class) of the Most Admirable Order of the Direkgunabhorn. - (2009) Outstanding
Researcher Award, The National Research Council of THAILAND (NRCT). - (2009) Innovation
Ambassador, National Innovation Agency (NIA), - (2008) Highest
Citation Award (Awarded to Researcher Receiving The Highest Number of
Citations), - (2007) Outstanding
Researcher Award, - (2006-2009) TRF
Research Scholar, The - (2005) Science and
Technology Research Grant (12th), Thailand Toray Science Foundation,
Toray Industries, Inc., |
|
Professional Experience: |
The Petroleum and
Petrochemical College, Chulalongkorn
University, Bangkok, Thailand |
|
Research Interests: |
- Crystallization and melting
behavior of semi-crystalline polymers and blends; - Wound dressings and cell/tissue scaffolding materials. |
|
Scientific or Technical
Publications: |
1. Books/Book Chapters P.
Supaphol, O. Suwantong, P. Sangsanoh and A. Neamnark, "Electrospinning
in Drug Delivery," in Bionanotechnology II: Global Prospects
(D.E. Reisner, Ed.), CRC Press, Boca Raton, 455-477, 2011. (ISBN:
9781439804636) พิชญ์
ศุภผล
ผกากรอง
สังข์เสนาะ
และ
พิมลพรรณ
กำพลานนท์วัฒน์,
“บทที่ 6
วัสดุชีวภาพที่มีสมบัติพิเศษ” ใน
วัสดุชีวภาพรักษ์โลก
(Green
Biomaterials) (รังสิมา
ชลคุป
วีรศักดิ์
สมิทธิพงศ์
และ กล้าณรงค์
ศรีรอต,
บรรณาธิการ),
หจก.
มณัสฟิล์ม,
นนทบุรี, 111-144,
2552. (ISBN:
9789743007507) P.
Supaphol, P. Aramwit, P. Sangsanoh, S. Changsarn, S. Chuangchote and
M.M. de Villiers, "Conductive Polymers: Materials and Applications,"
in Novel Polymers and Nanoscience (M. Adeli, Ed.), Transworld Research
Network, Kerala, 155-180, 2008. (ISBN: 9788178953922) P.
Supaphol and J.E. Spruiell, "Kinetics of Non-Isothermal
Crystallization of Syndiotactic Polypropylene: Avrami, Ozawa and Kissinger
Approaches," in Metallocene Technology in Commercial Applications
(G.M. Benedikt, Ed.), William Andrew Publishing/Plastics Design Library, 2.
Peer-Reviewed Journals (JIF = 2011) P.
Hariraksapitak, P. Pavasant and P. Supaphol, "Gelatin
Microspheres Incorporating Crude Bone Proteins and Their Integration within
Hyaluronan-Gelatin Hybrid Scaffolds for Bone Tissue Regeneration,"
in preparation. P.
K-hasuwan, S.
Tungprapa, A. Tongsima, B. Pornchuti, I. Jangchud and P. Supaphol,
"Immobilization of Papain and Bromelain onto Electrospun
Methacrylate-Based Copolymer Fibers," ACS Applied Materials & Interfaces, in preparation. P.
Kampalanonwat and P. Supaphol, "Competitive Adsorption of
Ag(I), Cu(II), Fe(II), and Pb(II) Ions in Aqueous Solutions by Aminated
Electrospun Polyacrylonitrile Nanofiber Mats," ACS Applied Materials & Interfaces, in preparation. J.
Panichpakdee, P. Pavasant and P. Supaphol, "In Vitro Biological
Evaluation of Cellulose Acetate Films Containing
Asiaticoside/2-Hydroxypropyl-β-cyclodextrin Complex," Carbohydrate
Polymers, in preparation. B.
Thapsukhon, D. Daranarong, P. Meepowpan, R. Bolloy, K. Inthanon, W. Wongkham,
P. Supaphol and W. Punyodom, "Effect of Topography of
Poly(L-lactide-co-ε-caprolactone)
Scaffolds on the Response of Cultured Human Mesenchymal Stem Cells and
Neuroblastoma Cell Lines," Polymer International, submitted. B.
Chuenjitkuntaworn, P. Pavasant and P. Supaphol, "Effect of
Asiaticoside on the Cell Viability, Morphology and Gene Expression of Human
Gingival Fibroblasts," Fitoterapia, submitted. [180] W.
Siriwatcharapiboon, N. Tinnarat and P. Supaphol, "Preparation
and Characterization of Electrospun Poly(vinyl
alcohol) Nanofibers Containing Platinum or Platinum-Ruthenium Nanoparticles,"
Journal of Polymer Research, accepted. [179] O.
Suwantong, P. Pankongadisak, S. Deachathai and P. Supaphol, "The
Potential of Electrospun Poly(L-lactic acid) Fiber Mats Containing a Crude
Garcinia Dulcis Extract for Use as Wound Dressings," Chiang Mai
Journal of Science, accepted. [178] T.
Permpool, P. Supaphol, L. Wannatong and A. Sirivat (2012) "Electrospun
Polydiphenylamine-Polyethylene Oxide as a Methanol Sensing Material,"
Advances in Polymer Technology, 31(4), 401-413. (December). (JIF = 0.875) [177] P.
Chuysinuan, P. Pavasant and P. Supaphol (2012) "Preparation
and Characterization of Caffeic Acid-Grafted Electrospun Poly(L-lactic
acid) Fiber Mats For Biomedical Applications," ACS Applied Materials & Interfaces, 4(6), 3031-3040. (June). (JIF = 4.525) [176] O.
Suwantong, P. Pankongadisak, S. Deachathai and P. Supaphol (2012) "Electrospun
Poly(L-lactic acid) Fiber Mats Containing a Crude Garcinia Cowa Extract for
Wound Dressing Applications," Journal of Polymer Research, 19(6),
9896. (June). (JIF = 1.733) [175] P.
K-hasuwan, [174] P.
Supaphol, A. Neamnark, P. Taepaiboon and P. Pavasant (2012) "Effect of
Degree of Acetylation on In Vitro Biocompatibility of Electrospun Cellulose
Acetate-Based Fibrous Matrices," Chiang Mai Journal of Science,
39(2), 231-245. (April) (JIF =
0.473) [173] V.
Rattanaruengsrikul, N. Pimpha and P. Supaphol (2012) "In Vitro
Efficacy and Toxicology Evaluation of Silver Nanoparticle-Loaded Gelatin
Hydrogel Pads as Antibacterial Wound Dressings," Journal of
Applied Polymer Science, 124(2), 1668-1682. (April) (JIF =
1.289) [172] T.
Nitanan, P. Opanasopit, P. Akkaramongkolporn, T. Rojanarata, T. Ngawhirunpat
and P. Supaphol (2012) "Effects of Processing Parameters on Morphology of
Electrospun Polystyrene Nanofibers," Korean Journal of Chemical
Engineering, 29(2), 173-181. (February) (JIF =
0.991) [171] P.
Supaphol, O. Suwantong, P. Sangsanoh, S. Srinivasan, R. Jayakumar and
S.V. Nair (2012) "Electrospinning of Biocompatible Polymers and Their
Potentials in Biomedical Applications," Advances in Polymer
Science, 246, 213-240. (January) (JIF =
3.890) [170] P.
Kampalanonwat and P. Supaphol (2011) "Preparation of
Hydrolyzed Electrospun Polyacrylonitrile Fiber Mats as Chelating Substrates:
a Case Study on Copper(II) Ions," Industrial
& Engineering Chemistry Research, 50(21), 11912-11921. (November) (JIF = 2.237) [169] P.
K-hasuwan, P. Pavasant and P. Supaphol (2011) "Effect
of the Surface Topography of Electrospun Poly(ε-caprolactone)/Poly(3-hydroxybuterate-co-3-hydroxyvalerate)
Fibrous Substrates on Cultured Bone Cell Behavior," Langmuir, 27(17), 10938-10946. (September) (JIF =
4.186) [168] P.
Thitiwongsawet and P. Supaphol (2011) "Carbendazim-Loaded
Electrospun Poly(vinyl alcohol) Fiber Mats and
Release Characteristics of Carbendazim Therefrom," Polymers for
Advanced Technologies, 22(9), 1366-1374. (September) (JIF =
2.007) [167] S. Changsarn,
J.D. Mendez, K. Shanmuganathan, E.J. Foster, C. Weder and P. Supaphol
(2011) "Biologically-Inspired Hierarchical Design of
Nanocomposites Based on Poly(ethylene oxide) and
Cellulose Nanofibers," Macromolecular Rapid Communications, 32(17),
1367-1372. (September) (JIF = 4.596) [166] J.
Kaewsaenee, P. Visal-athaphand, P. Supaphol and V. Pavarajarn (2011)
"Effects of Magnesium and Zirconium Dopants on Characteristics of
Titanium (IV) Oxide Fibers Prepared by Combined Sol-Gel and Electrospinning
Techniques," Industrial & Engineering Chemistry Research,
50(13), 8042-8049. (July) (JIF =
2.237) [165] P.
Thitiwongsawet, P. Sae-Lee, P. Kwanduen, [164] S.
Changsarn, J.D. Mendez, C. Weder, T. Srikhirin and P. Supaphol (2011)
"Electrospinning of Light-Emitting Fibers from a Tertiary Blend
Solution of an Inert Polymer and Two Conjugated Polymers," Chiang
Mai Journal of Science, 38(2), 193-209. (April) (JIF =
0.473) [163] J.
Panichpakdee and P. Supaphol (2011) "Use of
2-Hydroxypropyl-β-cyclodextrin as Adjuvant for Enhancing Encapsulation
and Release Characteristics of Asiaticoside within and from Cellulose Acetate
Films," Carbohydrate Polymers, 85(1), 251-260. (April) (JIF = 3.628) [162] T.
Pisuchpen, N. Chaim-ngoen, N. Intasanta, P. Supaphol and V. P. Hoven (2011)
"Tuning Hydrophobicity and Water Adhesion by Electrospinning and
Silanization," Langmuir, 27(7), 3654–3661. (April) (JIF = 4.186) [161]
T. Tharasanit, N. Phutikanit, C. Wangdee, K. Soontornvipart, S. Tantrajak, T.
Kaewamatawong, J. Suwimonteerabutr, P. Supaphol and M. Techakumphu (2011)
"Differentiation Potentials of Canine Bone Marrow Mesenchymal Stem
Cells," Thai Journal of Veterinary Medicine, 41(1), 79–86. (March) (JIF = 0.194) [160] A.
Thongphud, P. Visal-athaphand, P. Supaphol and B. Paosawatyanyong (2011)
"Improvement of Hydrophilic Properties on Electrospun
Polyacrylonitrile Fabrics Surface by Plasma Treatment," Advanced
Materials Research, 213, 103-106. (February) (JIF =
n/a) [159] P.
Sikareepaisan, U. Ruktanonchai and P. Supaphol (2011) "Preparation
and Characterization of Asiaticoside-Loaded Alginate Films and Their Potential
for Use as Effectual Wound Dressings," Carbohydrate Polymers,
83(4), 1457-1469. (February) (JIF =
3.628) [158] O.
Suwantong, P. Pavasant and P. Supaphol (2011) "Electrospun
Zein Fibrous Membranes Using Glyoxal as Cross-linking Agent: Preparation,
Characterization and Potential for Use in Biomedical Applications," Chiang
Mai Journal of Science, 38(1), 56-70. (January) (JIF =
0.473) [157] P.
Kampalanonwat and P. Supaphol (2010) "Preparation and Adsorption Behavior
of Aminated Electrospun Polyacrylonitrile Nanofiber Mats for Heavy Metal Ion
Removal," ACS Applied
Materials & Interfaces, 2(12), 3619–3627. (December) (JIF =
4.525) [156] O.
Suwantong, U. Ruktanonchai and P. Supaphol (2010) "In Vitro
Biological Evaluation of Electrospun Cellulose Acetate Fiber Mats Containing
Asiaticoside or Curcumin," Journal of Biomedical Materials
Research - Part A, 94(4), 1216-1225. (September) (JIF =
2.625) [155] J.
Kaewsaenee, P. Visal-athaphand, P. Supaphol and V. Pavarajarn (2010) "Fabrication
and Characteristics of Neat and Aluminium-Doped Titanium (IV) Oxide Fibers
Prepared by Combined Sol-Gel and Electrospinning Techniques," Ceramics
International, 36(7), 2055-2061. (September) (JIF =
1.751) [154] P.
Hariraksapitak and P. Supaphol (2010) "Preparation and Properties of a-Chitin
Whisker-Reinforced Hyaluronan-Gelatin Nanocomposite Scaffolds," Journal
of Applied Polymer Science, 117(6), 3406-3418. (September) (JIF = 1.289) [153] B.
Chuenjitkuntaworn, [152] N.
Charernsriwilaiwat, P. Opanasopit, T. Rojanarata, T. Ngawhirunpat and P.
Supaphol (2010) "Preparation and Characterization of
Chitosan-Hydroxybenzotriazole/Poly(vinyl alcohol)
Blend Nanofibers by the Electrospinning Technique," Carbohydrate
Polymers, 81(3), 675-680. (July) (JIF =
3.628) [151] S.
Wongsasulak, M. Patapeejumruswong, J. Weiss, P. Supaphol and T.
Yoovidhya (2010) "Electrospinning of Food-Grade Nanofibers from
Cellulose Acetate and Egg Albumen Blends," Journal of Food
Engineering, 98(3), 370-376. (June) (JIF =
2.414) [150] S. Jipa, T.
Zaharescu and P. Supaphol (2010) "Thermal Stability of Isotactic
Polypropylene Modified with Calcium Carbonate Nanoparticles," Polymer
Bulletin, 64(8), 783-790. (May) (JIF =
1.532) [149] P.
Rujitanaroj, [148] R.
Dangtungee and P. Supaphol (2010) "Melt Rheology and Extrudate Swell of
Sodium Chloride-Filled Low-Density Polyethylene: Effects of Content and Size
of Salt Particles," Polymer Testing, 29(2), 188-195. (April) (JIF = 1.608) [147] P.
Sangsanoh, O. Suwantong, A. Neamnark, P. Cheepsunthorn, P. Pavasant and P.
Supaphol (2010) "In Vitro Biocompatibility of Electrospun and
Solvent-Cast Chitosan Substrata towards Schwann, Osteoblast, Keratinocyte and
Fibroblast Cells," European Polymer Journal, 46(3), 428-440. (March) (JIF = 2.739) [146] P.
Zahedi, [145] B.
Chuenjitkuntaworn, P. Supaphol, P. Pavasant and D. Damrongsri (2010) "Electrospun
Poly(L-lactic acid)/Hydroxyapatite Composite Fibrous
Scaffolds for Bone Tissue Engineering," Polymer International,
59(2), 227-235. (February) (JIF =
1.902) [144]
C. Vanichvattanadecha, P. Supaphol, N. Nagasawa, M. Tamada, [143] A.
Watthanaphanit, P. Supaphol, H. Tamura, [142] J.
Junkasem, R. Rujiravanit, B.P. Grady and P. Supaphol (2010) "X-Ray
Diffraction and Dynamic Mechanical Analyses of a-Chitin
Whisker-Reinforced Poly(vinyl alcohol) Nanocomposite
Nanofibers," Polymer International, 59(1), 85-91.
(January) (JIF = 1.902) [141] N.
Sangkhaprom, P. Supaphol and V. Pavarajarn (2010) "Fibrous
Zinc Oxide Prepared by Combined Electrospinning and Solvothermal Techniques,"
Ceramics International, 36(1), 357-363. (January) (JIF = 1.751) [140] M.
Krissanasaeranee, P. Supaphol and S. Wongkasemjit (2010) "Preparation
of Poly(vinyl alcohol)/Tin Glycolate Composite
Fibers by Combined Sol-Gel/Electrospinning Techniques and Their Conversion to
Ultrafine Tin Oxide Fibers," Materials Chemistry and Physics,
119(1-2), 175-181. (January) (JIF = 2.487) [139] A.
Neamnark, O. Suwantong, R. Bahadur K.C., C.Y.M. Hsu, P. Supaphol and
H. Uludağ (2009) "Aliphatic Lipid Substitution on 2
kDa-Polyethylenimine Improves Plasmid Delivery and Transgene Expression,"
Molecular Pharmaceutics, 6(6), 1798-1815. (November-December)
(JIF = 4.782) [138] C.
Dheraprasart, [137] T.
Suksamran, P. Opanasopit, T. Rojanarata, T. Ngawhirunpat, U. Ruktanonchai and
P. Supaphol (2009) "Biodegradable Alginate
Microparticles Developed by Electrohydrodynamic Spraying Techniques for Oral
Delivery of Protein," Journal of Microencapsulation, 26(7),
563-570. (October) (JIF = 1.553) [136] V.
Rattanaruengsrikul, [135] R.
Dangtungee and P. Supaphol (2009) "An Investigation on
Shear Flow, Elongational Flow and Extrudate Swell of Nanometre Calcium Carbonate
Filled Polypropylene on Capillary Rheometer," The Journal of
KMUTNB, 19(2), 144-153. (May-August) (JIF = n/a) [134] W.
Mattanavee, O. Suwantong, S. Puthong, T. Bunaprasert, V.P. Hoven and P.
Supaphol (2009) "Immobilization of Biomolecules on the
Surface of Electrospun Polycaprolactone Fibrous Scaffolds for Tissue
Engineering," ACS Applied Materials & Interfaces, 1(5),
1076-1085. (May) (JIF = 4.525) [133] P.
Chuysinuan, N. Chimnoi, S. Techasakul and P. Supaphol (2009)
"Gallic Acid-Loaded Electrospun Poly(L-lactic
acid) Fiber Mats and Their Release Characteristic," Macromolecular
Chemistry and Physics, 210(10), 814-822. (May) (JIF = 2.361) [132] S.
Changsarn, R. Traiphol, T. Pattanatornchai, T. Srikhirin and P. Supaphol
(2009) " [131] S.
Sutthiphong, P. Pavasant and P. Supaphol (2009) "Electrospun
1,6-Diisocyanatohexane-Extended Poly(1,4-butylene
succinate) Fiber Mats and Their Potential for Use as Bone Scaffolds,"
Polymer, 50(6), 1548-1558. (March) (JIF = 3.438) [130] S.
Anantawaraskul, S. Ketdee and P. Supaphol (2009) "Stochastic
Simulation for Morphological Development during Isothermal Crystallization of
Semi-Crystalline Polymers: A Case Study on Syndiotactic Polypropylene,"
Journal of Applied Polymer Science, 111(5), 2260-2268. (March)
(JIF = 1.289) [129] A.
Watthanaphanit, P. Supaphol, T. Furuike, S. Tokura, H. Tamura and R.
Rujiravanit (2009) "Novel Chitosan-Spotted Alginate Fibers from
Wet-Spinning of Alginate Solutions Containing Emulsified Chitosan-Citrate
Complex and Their Characterization," Biomacromolecules, 10(2),
320-327. (February) (JIF = 5.479) [128] T. Ngawhirunpat,
P. Opanasopit, T. Rojanarata, P. Akkaramongkolporn, U. Ruktanonchai and P.
Supaphol (2009) "Development of Meloxicam-Loaded
Electrospun Poly(vinyl alcohol) Mats as a Transdermal Therapeutic Agent,"
Pharmaceutical Development and Technology, 14(1), 70-79.
(January) (JIF = 1.363) [127] S.
Changsarn, J.D. Mendez, C. Weder and P. Supaphol (2008) "Morphology
and Photophysical Properties of Electrospun Light-Emitting Polystyrene/Poly(phenylene ethynylene) Fibers," Macromolecular
Materials and Engineering, 293(12), 952-963. (December) (JIF =
1.986) [126] W.
Ritcharoen, P. Supaphol and P. Pavasant (2008) "Development
of Polyelectrolyte Multilayer-Coated Electrospun Cellulose Acetate Fiber Mat
as Composite Membranes," European Polymer Journal, 44(12),
3963-3968. (December) (JIF = 2.739) [125] R.
Dangtungee and P. Supaphol (2008) "Melt Rheology and Extrudate Swell of
Titanium (IV) Oxide Nanoparticle-Filled Isotactic Polypropylene: Effects of
Content and Surface Characteristics," Polymer Testing, 27(8),
951-956. (December) (JIF = 1.608) [124] P.
Rujitanaroj, N. Pimpha and P. Supaphol (2008) "Wound-Dressing
Materials with Anti-Bacterial Activity from Electrospun Gelatin Fiber Mats
Containing Silver Nanoparticles," Polymer, 49(21),
4723-4732. (October) (JIF = 3.438) [123] A.
Watthanaphanit, P. Supaphol, H. Tamura, [122] P.
Krutphun and P. Supaphol (2008) "Miscibility, Isothermal Crystallization/Melting
Behavior and Morphology of Poly(trimethylene
terephthalate)/Poly(buthylene terephthalate) Blends," Advances in
Science and Technology, 54, 243-248. (September) (JIF = n/a) [121] M.
Krissanasaeranee, T. Vongsetskul, R. Rangkupan, P. Supaphol and [120] O.
Suwantong, U. Ruktanonchai and P. Supaphol (2008) "Electrospun
Cellulose Acetate Fiber Mats Containing Asiaticoside or Centella Asiatica
Crude Extract and the Release Characteristics of Asiaticoside," Polymer,
49(19), 4239-4247. (September) (JIF = 3.438) [119] T.
Zaharescu, [118] M.
Phiriyawirut, N. Rodchanacheewa, N. Nensiri and P. Supaphol (2008) "Morphology
of Electrospun Mats of Soy Protein Isolate and Its Blend," Advanced
Materials Research, 55-57, 733-736. (August) (JIF = n/a) [117] A.
Thongphud, B. Paosawatyanyong, P. Visal-athaphand and P. Supaphol (2008) "Improvement
of Hydrophobic Properties of the Electrospun PVA fabrics by SF6
Plasma Treatment," Advanced Materials Research, 55-57,
625-628. (August) (JIF = n/a) [116]
S. Onnom, D. Wongratanaphisan, P. Supaphol, P. Udomsamuthirun, T.
Nilkamjon, S. Radrang, S. Sonkrua and S. Payoogthum (2008) "Characterization
of LiNbO3 Powder Prepared by Citrate Gel Method," Advanced
Materials Research, 55-57, 153-156. (August) (JIF = n/a) [115] A.
Neamnark, [114] W.
Ritcharoen, Y. Thaiying, Y. Saejeng, I. Jangchad, R. Rangkupan, C. Meechaisue
and P. Supaphol (2008) "Electrospun Dextran Fibrous Membranes," Cellulose,
15(3), 435-444. (June) (JIF = 3.600) [113]
P. Opanasopit, U. Ruktanonchai, O. Suwantong, S. Panomsuk, T. Ngawhirunpat,
C. Sittisombat, T. Suksamran and P. Supaphol (2008) "Electrospun Poly(vinyl alcohol)
Fiber Mats as Carriers for Extracts from Fruit Hull of Mangosteen,"
Journal of Cosmetic Science, 59(3), 233-242. (May-June) (JIF =
0.277) [112] P.
Hariraksapitak, O. Suwantong, P. Pavasant and P. Supaphol (2008) "Effectual
Drug-Releasing Porous Scaffolds from 1,6-Diisocyanatohexane-Extended
Poly(1,4-butylene succinate) for Bone Tissue Regeneration," Polymer,
49(11), 2678-2685. (May) (JIF = 3.438) [111] P.
Songchotikunpan, J. Tattiyakul and P. Supaphol (2008) "Extraction
and Electrospinning of Gelatin from Fish Skin," International
Journal of Biological Macromolecules, 42(3), 247-255. (April) (JIF
= 2.453) [110] P.
Supaphol and S. Chuangchote (2008) "On the Electrospinning of Poly(vinyl alcohol) Nanofiber Mats: A Revisit," Journal
of Applied Polymer Science, 108(2), 969-978. (April) (JIF = 1.289) [109] C.
Vanichvattanadecha, P. Supaphol and R. Rujiravanit (2008) "Preparation and Physico-Chemical
Characteristics of N-Maleoyl Chitosan Films," Macromolecular
Symposia, 264(1), 121-126. (March) (JIF = n/a) [108]
M. Phiriyawirut, P. Saenpong, S. Chalermboon, R. Sooksakoolrut, N.
Pochanajit, L. Vuttikit, A. Thongchai and P. Supaphol (2008) "Isotactic Polypropylene/Wood
Sawdust Composite: Effects of Natural Weathering, Water Immersion and
Gamma-Ray Irradiation on Mechanical Properties," Macromolecular
Symposia, 264(1), 59-66. (March) (JIF = n/a) [107] K.
Juengsuwattananon, P. Rujitanaroj, P. Supaphol, [106] P.
Sikareepaisan, A. Suksamrarn and P. Supaphol (2008) "Electrospun
Gelatin Fiber Mats Containing an Herbal – Centella Asiatica – Extract and
Release Characteristic of Asiaticoside," Nanotechnology, 19(1),
015102 (10pp) (January) (JIF = 3.979) [105] O.
Suwantong, P. Opanasopit, U. Ruktanonchai and P. Supaphol (2007)
"Electrospun
Cellulose Acetate Fiber Mats Containing Curcumin and Release Characteristic
of the Herbal Substance," Polymer, 48(26),
7546-7557. (December) (JIF = 3.438) [104] P.
Supaphol, [103]
S. Tungprapa, T. Puangparn, M. Weerasombut, I. Jangchud, P. Fakum, [102] C.
Meechaisue, P. Wutticharoenmongkol, R. Waraput, T. Huangjing, N. Ketbumrung,
P. Pavasant and P. Supaphol (2007) "Preparation of
Electrospun Silk Fibroin Fiber Mats as Bone Scaffolds: A Preliminary Study,"
Biomedical Materials, 2(3), 181-188. (September) (JIF = 2.158) [101] P.
Taepaiboon, U. Rungsardthong and P. Supaphol (2007) "Vitamin-Loaded
Electrospun Cellulose Acetate Nanofiber Mats as Transdermal and Dermal
Therapeutic Agents for Vitamin A Acid and Vitamin E," European
Journal of Pharmaceutics and Biopharmaceutics, 67(2), 387-397.
(September) (JIF = 4.269) [100] P.
Wutticharoenmongkol, P. Pavasant and P. Supaphol (2007) "Osteoblastic
Phenotype Expression of MC3T3-E1 Cultured on Electrospun Polycaprolactone
Fiber Mats Filled with Hydroxyapatite Nanoparticles," Biomacromolecules,
8(8), 2602-2610. (August) (JIF = 5.479) [99] S.
Tungprapa, [98] M.
Peesan, P. Supaphol and R. Rujiravanit (2007) "Effect
of Casting Solvent on Characteristics of Hexanoyl Chitosan/Polylactide Blend
Films," Journal of Applied Polymer Science, 105(4),
1844-1852. (August) (JIF = 1.289) [97] S.
Jitkarnka, B. Chusaksri, P. Supaphol and R. Magaraphan (2007)
"Influences of Thermal Aging on Properties and Pyrolysis Products of
Tire Tread Compound," Journal of Analytical and Applied Pyrolysis,
80(1), 269-276. (August) (JIF = 2.487) [96] J.
Watthanaarun, P. Supaphol and V. Pavarajarn (2007) "Photocatalytic
Activity of Neat and Silicon-Doped Titanium (IV) Oxide Nanofibers Prepared by
Combined Sol-Gel and Electrospinning Techniques," Journal of
Nanoscience and Nanotechnology, 7(7), 2443-2450. (July) (JIF =
1.563) [95] N.
Choktaweesap, K. Arayanarakul, D. Aht-ong, C. Meechaisue and P. Supaphol
(2007) "Electrospun
Gelatin Fibers: Effect of Solvent System on Morphology and Fiber Diameters,"
Polymer Journal, 39(6), 622-631. (June) (JIF = 1.258) [94]
P. Sangsanoh, S. Waleetorncheepsawat, O. Suwantong, P. Wutticharoenmongkol,
O. Weeranantanapan, B. Chuenjitkuntaworn, P. Cheepsunthorn, P. Pavasant and P.
Supaphol (2007) "In Vitro Biocompatibility of Schwann
Cells on Surfaces of Biocompatible Polymeric Electrospun Fibrous and Solution-Cast
Film Scaffolds," Biomacromolecules, 8(5), 1587-1594.
(May) (JIF = 5.479) [93] P.
Taepaiboon, U. Rungsardthong and P. Supaphol (2007) "Effect of Cross-linking on
Properties and Release Characteristics of Sodium Salicylate-Loaded
Electrospun Poly(vinyl alcohol) Fiber Mats," Nanotechnology,
18(17), 175102 (11pp) (May) (JIF = 3.979) [92]
K. Kanawung, K. Panitchanapan, S. Puangmalee, W. Utok, N. Kreua-ongarjnukool,
R. Rangkupan, C. Meechaisue and P. Supaphol (2007) "Preparation
and Characterization of Polycaprolactone/Diclofenac Sodium and Poly(vinyl
alcohol)/Tetracycline Hydrochloride Fiber Mats and Their Release of the Model
Drugs," Polymer Journal, 39(4), 369-378. (April) (JIF
= 1.258) [91] S.
Chuangchote, A. Sirivat and P. Supaphol (2007) "Mechanical
and Electro-Rheological Properties of Electrospun Poly(vinyl alcohol)
Nanofiber Mats Filled with Carbon Black Nanoparticles," Nanotechnology,
18(14), 145705 (8pp) (April) (JIF = 3.979) [90] A.
Chotipong, J.F. Scamehorn, T. Rirksomboon, [89] S.
Chuangchote, T. Srikhirin and P. Supaphol (2007) "Color Change of Electrospun
Polystyrene/MEH-PPV Fibers from [88] A.
Neamnark, N. Sanchavanakit, P. Pavasant, T. Bunaprasert, P. Supaphol
and R. Rujiravanit (2007) "In Vitro Biocompatibility
Evaluations of Hexanoyl Chitosan Film," Carbohydrate Polymers,
68(1), 166-172. (March) (JIF = 3.628) [87] K.
Sombatmankhong, N. Sanchavanakit, P. Pavasant and P. Supaphol (2007)
"Bone Scaffolds
from Electrospun Fiber Mats of Poly(3-hydroxybutyrate),
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Their Blend,"
Polymer, 48(5), 1419-1427. (February) (JIF = 3.438) [86]
O. Suwantong, S. Waleetorncheepsawat, N. Sanchavanakit, P. Pavasant, P.
Cheepsunthorn, T. Bunaprasert and P. Supaphol (2007) "In
Vitro Biocompatibility of Electrospun Poly(3-hydroxybutyrate) and
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fiber Mats," International
Journal of Biological Macromolecules, 40(3), 217-223. (February)
(JIF = 2.453) [85] V.
Pornsopone, P. Supaphol, R. Rangkupan and S. Tantayanon (2007)
"Electrospun Methacrylate-Based Copolymer/Indomethacin Fibers and
Their Release Characteristics of Indomethacin," Journal of
Polymer Research, 14(1), 53-59. (February) (JIF = 1.733) [84] P.
Supaphol, P. Thanomkiat, J. Junkasem and R. Dangtungee (2007)
"Non-Isothermal Melt-Crystallization and Mechanical Properties of
Titanium (IV) Oxide Nanoparticle-Filled Isotactic Polypropylene," Polymer
Testing, 26(1), 20-37. (February) (JIF = 1.608) [83] A.
Neamnark, R. Rujiravanit and P. Supaphol (2006) "Electrospinning
of Hexanoyl Chitosan," Carbohydrate Polymers, 66(3),
298-305. (November) (JIF = 3.628) [82] T.
Zaharescu, [81] R.
Dangtungee, S.S. Desai, S. Tantayanon and P. Supaphol (2006) "Melt
Rheology and Extrudate Swell of Low-Density Polyethylene/Ethylene-Octene
Copolymer Blends," Polymer Testing, 25(7), 888-895.
(October) (JIF = 1.608) [80] P.
Sangsanoh and P. Supaphol (2006) "Stability Improvement of Electrospun
Chitosan Nanofibrous Membranes in Neutral or Weak Basic Aqueous Solutions,"
Biomacromolecules, 7(10), 2710-2714. (October) (JIF = 5.479) [79] K.
Sombatmankhong, O. Suwantong, S. Waleetorncheepsawat and P. Supaphol (2006) "Electrospun
Fiber Mats of Poly(3-hydroxybutyrate),
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Their Blends," Journal
of Polymer Science - B: Polymer Physics, 44(19), 2923-2933.
(October) (JIF = 1.531) [78] S.
Tungprapa, I. Jangchud, P. Ngamdee, M. Rutnakornpituk and P. Supaphol
(2006) "Ultrafine
Electrospun Poly(ethylene glycol)-Polydimethylsiloxane-Poly(ethylene glycol)
Triblock Copolymer/Poly(ethylene oxide) Blend Fibers," Materials
Letters, 60(24), 2920-2924. (October) (JIF = 2.307) [77] P.
Taepaiboon, J. Junkasem, R. Dangtungee, T. Amornsakchai and P. Supaphol
(2006) "In Situ
Microfibrillar-Reinforced Composites of Isotactic Polypropylene/Recycled
Poly(ethylene terephthalate) System and Effect of Compatibilizer," Journal
of Applied Polymer Science, 102(2), 1173-1181. (October) (JIF =
1.289) [76] S.
Chuangchote, A. Sirivat and P. Supaphol (2006) "Electrospinning
of Styrene-Isoprene Copolymeric Thermoplastic Elastomers," Polymer
Journal, 38(9), 961-969. (September) (JIF
= 1.258) [75] C.
Meechaisue, R. Dubin, P. Supaphol, V.P. Hoven and J. Kohn (2006) "Electrospun
Mat of Tyrosine-Derived Polycarbonate Fibers for Potential Use as Tissue
Scaffolding Material," Journal of Biomaterials Science - Polymer
Edition, 17(9), 1039-1056. (September)
(JIF = 1.691) [74] J.
Junkasem, R. Rujiravanit and P. Supaphol (2006) "Fabrication
of a-Chitin
Whisker-Reinforced Poly(vinyl alcohol) Nanocomposite
Nanofibers by Electrospinning," Nanotechnology, 17(17), 4519-4528. (September) (JIF = 3.979) [73] Z. Ziaee
and P. Supaphol (2006) "Non-Isothermal Melt- and Cold-Crystallization
Kinetics of Poly(3-hydroxybutyrate)," Polymer
Testing, 25(6), 807-818. (September) (JIF = 1.608) [72] J.
Junkasem, J. Menges and P. Supaphol (2006) "Mechanical Properties of
Injection-Molded Isotactic Polypropylene/Roselle Fiber Composites," Journal
of Applied Polymer Science, 101(5), 3291-3300. (September) (JIF =
1.289) [71] J.
Sutasinpromprae, [70][cover]
C. Pattamaprom, W. Hongrojjanawiwat, P. Koombhongse, P. Supaphol, T.
Jarusuwannapoom and R. Rangkupan (2006) "The Influence of Solvent Properties
and Functionality on the Electrospinnability of Polystyrene Nanofibers,"
Macromolecular Materials and Engineering, 291(7), 840-847.
(July) (JIF = 1.986) [69] P.
Makphon, W. Ratanatongchai, S. Chongkum, [68] A.
Chotipong, J.F. Scamehorn, T. Rirksomboon, P. Supaphol and [67] K.
Arayanarakul, [66] P.
Supaphol and W. Harnsiri (2006) "Rheological and Isothermal Crystallization
Characteristics of Neat and Calcium Carbonate-Filled Syndiotactic
Polypropylene," Journal of Applied Polymer Science, 100(6),
4515-4525. (June) (JIF = 1.289) [65] M. Peesan,
R. Rujiravanit and P. Supaphol (2006) "Electrospinning of Hexanoyl
Chitosan/Polylactide Blends," Journal of Biomaterials Science -
Polymer Edition, 17(5), 547-565. (May) (JIF = 1.691) [64] M.
Peesan, A. Sirivat, P. Supaphol and R. Rujiravanit (2006) "Dilute
Solution Properties of Hexanoyl Chitosan in Chloroform, Dichloromethane and
Tetrahydrofuran," Carbohydrate Polymers, 64(2),
175-183. (May) (JIF = 3.628) [63] P.
Taepaiboon, U. Rungsardthong and P. Supaphol (2006) "Drug-Loaded
Electrospun Mats of Poly(vinyl alcohol) Fibres and
Their Release Characteristics of Four Model Drugs," Nanotechnology,
17(9), 2317-2329. (May) (JIF = 3.979) [62] J.
Manee-in, M. Nithitanakul and P. Supaphol (2006) "Effects
of Solvent Properties and Solvent System, Electrostatic Field Strength and Inorganic
Salt Addition on Electrospun Polystyrene Fibers," Iranian Polymer
Journal, 15(4), 341-354. (April) (JIF = 0.936) [61] P.
Rungruang, B.P. Grady and P. Supaphol (2006) "Surface-Modified
Calcium Carbonate Particles by Admicellar Polymerization to be used as Filler
for Isotactic Polypropylene," Colloids and Surfaces - A:
Physicochemical and Engineering Aspects, 275(1-3), 114-125.
(March) (JIF = 2.236) [60] P.
Wutticharoenmongkol, N. Sanchavanakit, P. Pavasant and P. Supaphol (2006) "Novel
Bone Scaffolds of Electrospun Polycaprolactone Fibers Filled with
Nanoparticles," Journal of Nanoscience and Nanotechnology, 6(2),
514-522. (February) (JIF = 1.563) [59] W.
Tanglumlert, P. Prasassarakich, P. Supaphol and S. Wongkasemjit (2006) "Hard-Coating
Materials for Poly(methyl methacrylate) from
Glycidoxypropyltrimethoxysilane-Modified Silatrane via a Sol-Gel Process,"
Surface & Coatings Technology, 200(8), 2784-2790. (January)
(JIF = 1.867) [58] S.
Chuangchote and P. Supaphol (2006) "Fabrication of Aligned Poly(vinyl alcohol) Nanofibers by Electrospinning,"
Journal of Nanoscience and Nanotechnology, 6(1), 125-129.
(January) (JIF = 1.563) [57] P.
Wutticharoenmongkol, [56] P.
Supaphol, C. Mit-uppatham and M. Nithitanakul (2005) "Ultrafine
Electrospun Polyamide-6 Fibers: Effect of Emitting Electrode Polarity on
Morphology and Average Fiber Diameter," Journal of Polymer
Science - B: Polymer Physics, 43(24), 3699-3712. (December) (JIF =
1.531) [55] J.
Sriupayo, P. Supaphol, J. Blackwell and R. Rujiravanit (2005)
"Preparation and Characterization of a-Chitin
Whisker-Reinforced Chitosan Nanocomposite Films with or without Heat
Treatment," Carbohydrate Polymers, 62(2), 130-136.
(November) (JIF = 3.628) [54] P.
Wongpanit, N. Sanchavanakit, P. Pavasant, P. Supaphol, S. Tokura and
R. Rujiravanit (2005) "Preparation and Characterization of
Microwave-Treated Carboxymethyl Chitin and Carboxymethyl Chitosan Films for
Potential Use in Wound Care Application," Macromolecular
Bioscience, 5(10), 1001-1012. (October) (JIF = 3.886) [53] P.
Thanomkiat, D. Aht-ong and P. Supaphol (2005) "Non-Isothermal
Melt-Crystallization and Subsequent Melting Behavior of Pigmented Medium-Density
Polyethylene," Polymer Testing, 24(7), 873-885.
(October) (JIF = 1.608) [52] P.
Supaphol, C. Mit-uppatham and M. Nithitanakul (2005) "Ultrafine
Electrospun Polyamide-6 Fibers: Effects of Solvent System and Emitting
Electrode Polarity on Morphology and Average Fiber Diameter," Macromolecular
Materials and Engineering, 290(9), 933-942. (September) (JIF =
1.986) [51] V.
Pornsopone, P. Supaphol, R. Rangkupan and [50] S.
Limpanart, S. Khunthon, P. Taepaiboon, P. Supaphol, T. Srikhirin, W.
Udomkichdecha, Y. Boontongkong (2005) "Effect of Surfactant
Coverage on Preparation of Melt-Intercalated Polystyrene-Clay Nanocomposites,"
Materials Letters, 59(18), 2292-2295. (August) (JIF = 2.307) [49] J.
Sriupayo, P. Supaphol, J. Blackwell and R. Rujiravanit (2005)
"Preparation and Characterization of a-Chitin
Whisker-Reinforced Poly(vinyl alcohol) Nanocomposite
Films with or without Heat Treatment," Polymer, 46(15),
5637-5644. (July) (JIF = 3.438) [48] P.
Wutticharoenmongkol, P. Supaphol, T. Srikhirin, T. Kerdcharoen and T.
Osotchan (2005) "Electrospinning of Polystyrene/Poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene
vinylene) Blends," Journal of Polymer Science - B: Polymer
Physics, 43(14), 1881-1891. (July) (JIF = 1.531) [47] P. Krutphun
and P. Supaphol (2005) "Thermal and Crystallization
Characteristics of Poly(trimethylene
terephthalate)/Poly(ethylene naphthalate) Blends," European
Polymer Journal, 41(7), 1561-1568. (July) (JIF = 2.739) [46] M.
Peesan, P. Supaphol and R. Rujiravanit (2005) "Preparation
and Characterization of Hexanoyl Chitosan/Polylactide Blend Films," Carbohydrate
Polymers, 60(3), 343-350. (May) (JIF = 3.628) [45] P.
Supaphol and P. Thanomkiat (2005) "A Review on Crystallization
Theories of Copolymers," Journal of Research in Engineering and
Technology, 2(2), 161-177. (April-June) (JIF = n/a) [44] J.
Watthanaarun, V. Pavarajarn and P. Supaphol (2005) "Titanium
(IV) Oxide Nanofibers by Combined Sol-Gel and Electrospinning Techniques:
Preliminary Report on Effects of Preparation Conditions and Secondary Metal
Dopant," Science and Technology of Advanced Materials, 6(3-4),
240-245. (April-May) (JIF = 3.513) [43]
T. Jarusuwannapoom, W. Hongrojjanawiwat, S. Jitjaicham, L. Wannatong, M.
Nithitanakul, C. Pattamaprom, P. Koombhongse, R. Rangkupan and P. Supaphol
(2005) "Effect of Solvents on Electro-Spinnability of
Polystyrene Solutions and Morphological Appearance of Resulting Electrospun
Polystyrene Fibers," European Polymer Journal, 41(3),
409-421. (March) (JIF = 2.739) [42] D.
Preechawong, M. Peesan, P. Supaphol and R. Rujiravanit (2005)
"Preparation and Characterization of Starch/Poly(L-lactic
acid) Hybrid Foams," Carbohydrate Polymers, 59(3),
329-337. (February) (JIF = 3.628) [41] R.
Dangtungee, J. Yun and P. Supaphol (2005) "Melt
Rheology and Extrudate Swell of Calcium Carbonate Nanoparticle-Filled
Isotactic Polypropylene," Polymer Testing, 24(1),
2-11. (February) (JIF = 1.608) [40]
P. Wanwanichai, J. Junkasem, B. Saimaneewong, R. Mahasan, P. Tantivess, R.
Magaraphan, Y. Vanichvarakij, P. Petiraksakul and P. Supaphol (2005)
"Sheet-Cast Poly(methyl methacrylate): One-Step (Water) versus
Two-Step (Water-Air) Isothermal Processes," Iranian Polymer
Journal, 14(1), 61-69. (January) (JIF = 0.936) [39] P.
Charoenphol and P. Supaphol (2005) "Nonisothermal
Melt-Crystallization Kinetics of Syndiotactic Polypropylene Compounded with
Various Nucleating Agents," Journal of Applied Polymer Science,
95(2), 245-253. (January) (JIF = 1.289) [38] P.
Supaphol, P. Thanomkiat and R.A. Phillips (2004) "Influence
of Molecular Characteristics on Non-Isothermal Melt-Crystallization Kinetics
of Syndiotactic Polypropylene," Polymer Testing, 23(8),
881-895. (December) (JIF = 1.608) [37] C.
Mit-uppatham, M. Nithitanakul and P. Supaphol (2004) "Ultrafine
Electrospun Polyamide-6 Fibers: Effect of Solution Condition on Morphology
and Average Fiber Diameter," Macromolecular Chemistry and Physics,
205(17), 2327-2338. (November) (JIF = 2.361) [36] P.
Supaphol and [35] L.
Wannatong, A. Sirivat and P. Supaphol (2004) "Effects
of Solvents on Electrospun Polymeric Fibers: Preliminary Study on Polystyrene,"
Polymer International, 53(11), 1851-1859. (November) (JIF =
1.902) [34] N.
Soykeabkaew, P. Supaphol and R. Rujiravanit (2004) "Preparation
and Characterization of Jute- and Flax-Reinforced Starch-Based Composite
Foams," Carbohydrate Polymers, 58(1), 53-63. (October)
(JIF = 3.628) [33] N.
Apiwanthanakorn, P. Supaphol and M. Nithitanakul (2004) "Non-Isothermal
Melt-Crystallization Kinetics of Poly(trimethylene
terephthalate)," Polymer Testing, 23(7), 817-826.
(October) (JIF = 1.608) [32] C.
Mit-uppatham, M. Nithitanakul and P. Supaphol (2004) "Effects
of Solution Concentration, Emitting Electrode Polarity, Solvent Type and Salt
Addition on Electrospun Polyamide-6 Fibers: A Preliminary Report," Macromolecular
Symposia, 216(1), 293-299. (September) (JIF = n/a) [31] D.
Preechawong, M. Peesan, R. Rujiravanit and P. Supaphol (2004) "Preparation
and Properties of Starch/Poly(vinyl alcohol)
Composite Foams," Macromolecular Symposia, 216(1),
217-227. (September) (JIF = n/a) [30] P.
Supaphol, P. Charoenphol and J. Junkasem (2004) "Effects of
Nucleating Agents on Crystallization and Melting Behavior and Mechanical
Properties of Nucleated Syndiotactic Poly(propylene),"
Macromolecular Materials and Engineering, 289(9), 818-827.
(September) (JIF = 1.986) [29] D.
Preechawong, M. Peesan, P. Supaphol and R. Rujiravanit (2004) "Characterization
of Starch/Poly(epsilon-caprolactone) Hybrid Foams,"
Polymer Testing, 23(6), 651-657. (September) (JIF = 1.608) [28] P.
Supaphol, P. Srimoaon and A. Sirivat (2004) "Effects of Crystalline and
Orientational Memory Phenomena on Isothermal Bulk Crystallization and
Subsequent Melting Behavior of Poly(trimethylene
terephthalate)," Polymer International, 53(8),
1118-1126. (August) (JIF = 1.902) [27] P.
Thanomkiat, R.A. Phillips and P. Supaphol (2004) "Influence
of Molecular Characteristics on Overall Isothermal Melt-Crystallization
Behavior and Equilibrium Melting Temperature of Syndiotactic Polypropylene,"
European Polymer Journal, 40(8), 1671-1682. (August) (JIF =
2.739) [26] K.
Trongtorsak, P. Supaphol and S. Tantayanon (2004) "Effect of
Calcium Stearate and Pimelic Acid Addition on Mechanical Properties of
Heterophasic Isotactic Polypropylene/Ethylene-Propylene Rubber Blend,"
Polymer Testing, 23(5), 533-539. (August) (JIF = 1.608) [25] N.
Somrang, M. Nithitanakul, B.P. Grady and P. Supaphol (2004) "Non-Isothermal
Melt Crystallization Kinetics for Ethylene-Acrylic Acid Copolymers and
Ethylene-Methyl Acrylate-Acrylic Acid Terpolymers," European
Polymer Journal, 40(4), 829-838. (April) (JIF = 2.739) [24]
N. Dangseeyun, P. Supaphol and M. Nithitanakul (2004) "Thermal,
Crystallization and Rheological Characteristics of Poly(trimethylene
terephthalate)/Poly(buthylene terephthalate) Blends," Polymer
Testing, 23(2), 187-194. (April) (JIF = 1.608) [23]
P. Supaphol, [22]
P. Supaphol, W. Harnsiri and J. Junkasem (2004) "Effects
of Calcium Carbonate and Its Purity on Crystallization and Melting Behavior,
Mechanical Properties and Processability of Syndiotactic Polypropylene,"
Journal of Applied Polymer Science, 92(1), 201-212. (April)
(JIF = 1.289) [21]
P. Srimoaon, N. Dangseeyun and P. Supaphol (2004) "Multiple Melting
Behavior in Isothermally Crystallized Poly(trimethylene
terephthalate)," European Polymer Journal, 40(3),
599-608. (March) (JIF = 2.739) [20]
N. Pongrakananon, N. Somrang, W. Visitsart, P. Supaphol, M.
Nithitanakul and B.P. Grady (2004) "Blends of Ethylene-Methyl
Acrylate-Acrylic Acid Terpolymer with Ethylene-Acrylic Acid Copolymers:
Mechanical and Thermomechanical Properties," Journal of Applied
Polymer Science, 91(4), 2216-2222. (February) (JIF = 1.289) [19]
P. Supaphol, N. Dangseeyun, P. Thanomkiat and M. Nithitanakul (2004) "Thermal,
Crystallization, Mechanical and Rheological Characteristics of Poly(trimethylene terephthalate)/Poly(ethylene
terephthalate) Blends," Journal of Polymer Science - B: Polymer
Physics, 42(4), 676-686. (February) (JIF = 1.531) [18]
J. Sa-nguanruksa, R. Rujiravanit, P. Supaphol and S. Tokura (2004) "Porous
Polyethylene Membranes by Template-Leaching Technique: Preparation and
Characterization," Polymer Testing, 23(1), 91-99.
(February) (JIF = 1.608) [17]
N. Dangseeyun, P. Srimoaon, P. Supaphol and M. Nithitanakul (2004) "Isothermal
Melt Crystallization and Melting Behavior for Three Linear Aromatic
Polyesters," Thermochimica Acta, 409(1), 63-77. (January)
(JIF = 1.805) [16]
P. Supaphol, [15]
M. Peesan, R. Rujiravanit and P. Supaphol (2003) "Characterization
of Beta-Chitin/Poly(vinyl alcohol) Blend Films,"
Polymer Testing, 22(4), 381-387. (June) (JIF = 1.608) [14]
P. Supaphol and J.E. Spruiell (2002) "Non-Isothermal Bulk Crystallization
of High Density Polyethylene via Modified Depolarized-Light Microscopy
Technique: Further Analysis," Journal of Applied Polymer Science,
86(4), 1009-1022. (October) (JIF = 1.289) [13]
P. Supaphol and J.-S. Lin (2001) "Crystalline Memory
Effect in Isothermal Crystallization of Syndiotactic Polypropylenes: Effect
of Fusion Temperature on Crystallization and Melting Behavior," Polymer,
42(23), 9617-9626. (October) (JIF = 3.438) [12]
P. Supaphol (2001) "Crystallization and Melting
Behavior in Syndiotactic Polypropylene: Origin of Multiple Melting Phenomenon,"
Journal of Applied Polymer Science, 82(5), 1083-1097. (October)
(JIF = 1.289) [11]
P. Supaphol (2001) "Application of the Avrami, Tobin,
Malkin and Urbanovici-Segal Macrokinetic Models to Isothermal Crystallization
of Syndiotactic Polypropylene," Thermochimica Acta, 370(1&2),
37-48. (April) (JIF = 1.805) [10]
P. Supaphol (2001) "Unbiased Evaluation of Literature
Data on Equilibrium Melting Temperature and Enthalpy of Fusion of Perfectly
Syndiotactic Polypropylene," Journal of Applied Polymer Science,
79(9), 1603-1609. (February) (JIF = 1.289) [9] P.
Supaphol and J.E. Spruiell (2001) "Isothermal Melt- and
Cold-Crystallization Kinetics and Subsequent Melting Behavior in Syndiotactic
Polypropylene: A Differential Scanning Calorimetry Study," Polymer,
42(2), 699-712. (January) (JIF = 3.438) [8] P.
Supaphol and J.E. Spruiell (2000) "A New Technique for Using DSC Melting
Endotherms to Study Isothermal Bulk Crystallization of Semicrystalline
Polymers at Low Degrees of Undercooling: Syndiotactic Polypropylene,"
Journal of Macromolecular Science - B: Physics, B39(5&6),
775-792. (November) (JIF = 0.739) [7] P.
Supaphol, J.E. Spruiell and J.-S. Lin (2000) "Isothermal Melt Crystallization and
Melting Behavior of Syndiotactic Polypropylene," Polymer
International, 49(11), 1473-1482. (November) (JIF = 1.902) [6] P.
Supaphol (2000) "Non-Isothermal Bulk Crystallization and Subsequent
Melting Behavior of Syndiotactic Polypropylenes: Crystallization from the [5] P.
Supaphol and J.E. Spruiell (2000) "Application of the Avrami, Tobin,
Malkin and Simultaneous Avrami Macrokinetic Models to Isothermal
Crystallization of Syndiotactic Polypropylenes," Journal of
Macromolecular Science - B: Physics, B39(2),
257-277. (March) (JIF = 0.739) [4] P.
Supaphol and J.E. Spruiell (2000) "Regime Crystallization in
Syndiotactic Polypropylenes: Re-evaluation of the Literature Data," Polymer,
41(3), 1205-1216. (February) (JIF = 3.438) [3] P.
Supaphol and J.E. Spruiell (2000) "Crystalline Memory Effects in
Isothermal Crystallization of Syndiotactic Polypropylene," Journal
of Applied Polymer Science, 75(3), 337-346. (January) (JIF =
1.289) [2] P.
Supaphol and J.E. Spruiell (2000) "Thermal Properties and Isothermal Crystallization
of Syndiotactic Polypropylenes: Differential Scanning Calorimetry and Overall
Crystallization Kinetics," Journal of Applied Polymer Science,
75(1), 44-59. (January) (JIF = 1.289) [1] P.
Supaphol and J.E. Spruiell (1998) "Non-Isothermal Bulk
Crystallization Studies of High Density Polyethylene Using Light Depolarizing
Microscopy," Journal of Polymer Science - B: Polymer Physics,
36(4), 681-692. (March) (JIF = 1.531) 3.
Patent/Petty Patent Applications [19]
อนุสิทธิบัตร
(1003000021/8 ม.ค. 2553)
เรื่อง กรรมวิธีการเตรียมเจลาตินไฮโดรเจลที่มีอนุภาคซิลเวอร์นาโนผสมอยู่ด้วยวิธีการฉายรังสีแกมมา
โดย
นางอุรชา
รักษ์ตานนท์ชัย
นายพิชญ์ ศุภผล
และ
นางสาวปานปรุง
สิขรีไพศาล [18]
การประดิษฐ์
(0901004184/16 ก.ย. 2552)
เรื่อง การเตรียมเส้นใยไฮโดรไลซ์พอลิอะคริโลไนไตร์สำหรับใช้ในการจับไอออนของโลหะ
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล และ
นางสาวพิมลพรรณ
กำพลานนท์วัฒน์ [17]
อนุสิทธิบัตร
(0903001016/14 ก.ย. 2552)
เรื่อง กรรมวิธีการผลิตแผ่นเส้นใยอิเลคโตรสปันเจลาตินที่ผสมสารสกัดจากใบบัวบกโดยการปั่นเส้นใยด้วยไฟฟ้าสถิต
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
นางสาวปานปรุง
สิขรีไพศาล
และ
ศาสตราจารย์
ดร. อภิชาต
สุขสำราญ [16]
การประดิษฐ์
(0901003255/17 ก.ค. 2552)
เรื่อง กรรมวิธีการผลิตเส้นใยจากพอลิแอลแลคติคเอซิดที่มีอนุภาคนาโนซิงค์ออกไซด์ผสมอยู่ด้วยวิธีการปั่นด้วยไฟฟ้าสถิต
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล และ
นางสาวพิมพ์อร
รุจิธนโรจน์ [15]
การประดิษฐ์
(0901002996/2 ก.ค. 2552)
เรื่อง กรรมวิธีการผลิตเส้นใยอิเลคโตรสปันพอลิแอลแลคติคเอซิดผสมกรดแกลลิคด้วยวิธีการปั่นเส้นใยด้วยไฟฟ้าสถิต
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล และ
นางสาวปิยฉัฏร
ช่วยสีนวล [14]
การประดิษฐ์
(0901002535/8 มิ.ย. 2552)
เรื่อง กรรมวิธีการเพิ่มเสถียรภาพของแผ่นเส้นใยไคโตซานซึ่งเตรียมจากการปั่นเส้นใยด้วยไฟฟ้าสถิต
ในสารละลายที่มีสภาวะเป็นกรด
กลาง และเบส
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
นางสาวปานปรุง
สิขรีไฟศาล
และ
นางสาวเมลดา
รุ่งโรจน์ [13]
การประดิษฐ์
(0901001532/3 เม.ย. 2552)
เรื่อง กรรมวิธีการผลิตเส้นใยจากพอลิเอทิลีนออกไซด์และพอลิเอทิลีนไกลคอล
ด้วยวิธีการปั่นเส้นใยด้วยไฟฟ้าสถิตที่มีอนุภาคซิลเวอร์นาโนผสมอยู่
สำหรับใช้ต้านเชื้อแบคทีเรีย
เชื้อรา
และไวรัส
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
นางสาวพิมพ์อร
รุจิธนโรจน์
และ ดร.
ณัฏฐพร
พิมพะ [12]
การประดิษฐ์
(0901001531/3 เม.ย. 2552)
เรื่อง กรรมวิธีการผลิตเส้นใยพอลิอะคริโลไนโตร์ด้วยวิธีการปั่นเส้นใยด้วยไฟฟ้าสถิตที่มีอนุภาคซิลเวอร์นาโนผสมอยู่
สำหรับใช้ต้านเชื้อแบคทีเรีย
เชื้อรา
และไวรัส
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
นางสาวพิมพ์อร
รุจิธนโรจน์
และ ดร.
ณัฏฐพร
พิมพะ [11]
การประดิษฐ์
(0901000706/19 ก.พ. 2552)
เรื่อง กรรมวิธีการผลิตเส้นใยจากไคโตซานที่มีสารเตตระไฮโดรเคอคิวมินด้วยวิธีการปั่นเส้นใยด้วยไฟฟ้าสถิตสำหรับประยุกต์ใช้งานทางการแพทย์
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
นางสาวเมลดา
รุ่งโรจน์
และ
ศาสตราจารย์
ดร. อภิชาต
สุขสำราญ [10]
การประดิษฐ์
(0801005190/10 ต.ค. 2551)
เรื่อง การเตรียมแผ่นเส้นใยไฮโดรไลซ์พอลิอะคริโลไนไตร์สำหรับใช้ในการจับไอออนของโลหะ
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล และ
นางสาวพิมลพรรณ
กำพลานนท์วัฒน์ [9]
การประดิษฐ์
(0801003501/8 ก.ค. 2551)
เรื่อง กรรมวิธีการผลิตเส้นใยอิเลคโตรสปันพอลิแอลแลคติคเอซิดที่มีสารสกัดจากเปลือกมังคุดด้วยวิธีการปั่นเส้นใยด้วยไฟฟ้าสถิต
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
นางสาวพิมพ์อร
รุจิธนโรจน์
รองศาสตราจารย์
ดร. สุนิตย์
สุขสำราญ
และ
รองศาสตราจารย์
ดร. วาสนา
สุขุมศิริชาติ [8]
การประดิษฐ์
(0801003160/20 มิ.ย. 2551)
เรื่อง กรรมวิธีการเตรียมแผ่นไฮโดรเจลของเจลาตินที่มีอนุภาคนาโนของเงินผสมอยู่และแผ่นไฮโดรเจลของเจลาตินจากกรรมวิธีการเตรียมดังกล่าว
โดย
นายพิชญ์
ศุภผล
นางสาวณัฏฐพร
พิมพะ และ
นางสาววิชญารัตน์
รัตนเรืองศรีกุล [7]
อนุสิทธิบัตร
(0803000796/20 มิ.ย. 2551)
เรื่อง แผ่นเส้นใยอิเลคโตรสปันเซลลูโลสอะซีเตตที่มีสารสกัดบัวบกและกระบวนการเตรียมแผ่นเส้นใยดังกล่าว
โดย
นายพิชญ์
ศุภผล
นางอุรชา
รักษ์ตานนท์ชัย
และ
นางสาวอรวรรณ
สุวรรณทอง [6]
การประดิษฐ์
(0801002997/13 มิ.ย. 2551)
เรื่อง โครงเนื้อเยื่อชนิดโพลีไฮดรอกซีบิวทิวริกแอซิดและพอลีไฮดรอกซีบิวทิวริกแอซิดเชื่อมต่อกับไฮดรอกซีวาลิริกแอซิดสำหรับการซ่อมสร้างเนื้อเยื่อกระดูก
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
รองศาสตราจารย์
ทันตแพทย์
ดร.
ประสิทธิ์
ภวสันต์ และ
นายอรรถพล
ประสารสุขลาภ [5]
การประดิษฐ์
(0801002995/13 มิ.ย. 2551)
เรื่อง โครงเนื้อเยื่อชนิดโพลีแลคติกแอซิดสำหรับการซ่อมสร้างเนื้อเยื่อกระดูก
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
รองศาสตราจารย์
ทันตแพทย์
ดร.
ประสิทธิ์
ภวสันต์ และ
นายอรรถพล
ประสารสุขลาภ [4]
การประดิษฐ์
(0801002994/13 มิ.ย. 2551)
เรื่อง กรรมวิธีการผลิตเส้นใยอิเลคโตรสปันพอลิบิวทีลีนซัคซีเนตด้วยวีธีปั่นเส้นใยด้วยไฟฟ้าสถิตและการประยุกต์เพื่อใช้เป็นวัสดุโครงร่างสำหรับกระดูก
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
รองศาสตราจารย์
ทันตแพทย์
ดร.
ประสิทธิ์
ภวสันต์ และ
นางสาวศศิพิมพ์
สุทธิพงษ์ [3]
การประดิษฐ์
(0801002449/16 พ.ค. 2551)
เรื่อง กรรมวิธีการผลิตเส้นใยเจลาตินที่มีอนุภาคนาโนของเงินผสมอยู่
โดย
นายพิชญ์
ศุภผล
นางสาวณัฏฐพร
พิมพะ และ
นางสาวพิมพ์อร
รุจิธนโรจน์ [2]
การประดิษฐ์
(0801002085/25 เม.ย. 2551)
เรื่อง โครงเนื้อเยื่อชนิดโพลีบิวทีลีนซัคซีเนทเชื่อมต่อด้วยไดไอโซไซยานาโตเฮคเซนสำหรับการซ่อมสร้างเนื้อเยื่อกระดูก
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
รองศาสตราจารย์
ทันตแพทย์ ดร.
ประสิทธิ์
ภวสันต์ และ
ผู้ช่วยศาสตราจารย์
ทันตแพทย์
ปรินทร
หริรักษาพิทักษ์ [1]
การประดิษฐ์
(0801000175/14 ม.ค. 2551)
เรื่อง กรรมวิธีการผลิตโครงร่างเลี้ยงเซลล์จากพอลิคาโปรแลคโตนผสมไฮดรอกซีอะปาไทค์และโครงร่างเลี้ยงเซลล์ที่ได้จากกรรมวิธีนี้
โดย
รองศาสตราจารย์
ทันตแพทย์
ดร. ประสิทธิ์
ภวสันต์
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล และ
นางสาววิภาวรรณ
อินทร์รุ่ง 4.
Patent/Petty Patents [1]
อนุสิทธิบัตร
(5637/17 ก.ย. 2553
เลขที่คำขอ
0903001026/16 ก.ย. 2552) เรื่อง
วัสดุปิดแผลจากแผ่นฟิล์มอัลจิเนตที่ผสมสารเอเชียติโคไซด์และกรรมวิธีการผลิต
โดย
รองศาสตราจารย์
ดร. พิชญ์
ศุภผล
นางสาวปานปรุง
สิขรีไพศาล
และ ดร. อุรชา
รักษ์ตานนท์ชัย |
Go to PPC
Page
Go to Chula Page